Extra Wide Side Storage Boxes When designing your hull for use with an outboard, plan on a solid place to sit when you drive. Also, the need for lots of room to drive a mud motor is no longer necessary. The wide rear boxes also make a great rear casting deck.
 

Rear "Walk-Thru" Bench and Dual Gun Boxes This design works great for any motor, but an outboard or Hyperdrive especially! There is plenty of storage, yet the floor plan remains open.

Maximum Storage If you are not limited to needing a lot of space for mud motor operation, this is a great way to set up for outboard use.
 

16x44 Fishing Rig
Front and rear raised decks give both fishermen a bird's eye view of the skinny water fish. You can remove both decks in less than one minute.

15x54 Custom Dual gun boxes and rear bench for outboard driving.

18x54 Tunnel Hull and 40HP Nissan
Loaded with 2 men, gear, 13 gallons of gas, 2 batteries and trolling motor, this hull does a consistent 31 MPH.

17x54 Custom Dual gun boxes, extended deck, rear storage bench, and much more.

Rear "Walk Thru" Bench and Dual Gun Boxes Gas tank on the left and batteries on the right. (suggestion)

Pro Redfish Tournament Hull
This hull, designed by a redfish tournament pro, is an 18x60 made of 3/16 aluminum! It has a ton of dry storage, huge livewells and baitwells, catwalks for fighting reds from one end of the boat to the next, poling platform and a lot more. It is powered by a 90hp outboard and will do over 45mph!
 

Open Hull 16x44 Guide Edition. This 16x44 has plenty of room for you guys that have a LOT of bulky gear!

18x54 Tunnel
Removable rear deck and an extended front deck with an open hull make this a great fishing hull.

17x54 Custom Storage down the side. 2 live wells and a built in ice chest.

Open Hull 16x44 Guide Edition This 16x44 is perfect for an outboard OR a Mud Buddy! Talk about some moving around space.

Storage anyone?
This 18x50 Guide Edition has seven (7) storage compartments! Complete with ice chest, live well, gas tank storage, and battery compartment!
 

Dual Gun Boxes
This flotation model is equipped with 2 gun boxes for maximum dry storage. Remember, adding flotation means loss of dry storage under the front deck. However, you can make it up in many ways. This is one way.

Open Hull with Split Rear Bench and Dual Gun Boxes Complete with Rhino Liner, batteries are on the left and the gas tank is sheltered on the right. Great for BOTH outboard or a Mud Buddy.
 

21" Transoms
Remember that transoms are generally made in two sizes, 16" or 21". Our hulls come standard with a 16" transom because it is perfect for a mud motor AND a short shaft outboard. However, if you already own your outboard and it is a long shaft, you will need a 21" transom. Consequently, if you ever want to use a mud motor on this hull, you will need the extended shaft mud motor. It will be best to get the 16" transom and order a short shaft outboard unless you require a tall transom for rougher seas. However, our hulls are NOT bad about back washing!
 

Rear "Walk-Thru" Bench with Open Hull
Great design for any motor, but a perfect lay out for an outboard!
 

Poling The Duck Ponds
Poling the duck ponds has become a #1 tactic for tournament pros. This Pro is doing just that in his 18x60 Gator Trax made of 3/16 aluminum, powered by a 90 hp, in less than 5" of water!