Bay Boats
Up

Bay Boats
The Barracuda By Gator Trax

 Gator Trax only builds these hulls on a VERY LIMITED basis. We build no more than 4 to 6 per year. Orders for these boats are best if taken early in the year, from January to April most years. Nonetheless, if you found this page, you are obviously looking for a custom aluminum bay boat and we would still like to give you a quote, no matter what time of year it is! Depending on our workload with our traditional Gator Trax line, we may have time. Call us and we can quote out whatever you like.

  

Our aluminum bay boats are designed to take a beating and continue to perform. We offer several models with several options and always, promise to build you the best hull in its' class!


All New Strike Series Bass Boats

 

NOTE: All hulls include, 44" front deck (17'-20'  models), 48" front deck (22'-24' models), 42" rear deck (17'-20' models), 44" rear deck (22'-24' models), center or side console, running lights, dash switch panel, gas tank, jump seat in front of console, 7ft rod /storage box, front deck hatch, rear deck hatch, driving seat, and false flooring. The rest is up to you!

Exclusive Big Water Bracing
We invite you to print out and compare our bracing to our competitors.

Longitudinal Braces on 72" Bottom Boats

  • 6 Corrugated Bottom Runners Running From Transom to Bow
  • 8 @ 1" x 2" Rectangular tubing braces running the hull length (placed between each crimp)
  • One 4" T-Bar @1/4" thick used for center keel from transom to start of rake.
  • One 4" T-Bar @1/4" thick sandwiched between two 6" pieces of flat bar 1/4" thick from start of rake to tip of hull. This section of the rake takes the most beating from waves. It makes sense to us to beef it up here!
 

Transverse Bracing on 72" Bottom Boats

  • 2" x 2" Square tubing placed on 12" centers coped over runners.
  • 3" x 3/16" T-Bar connects keel to sides and transverse tubing.
  • 1/4" Gusset plates ties tubing, T-Bar, and keel together on 12" centers.
 

 

 

Longitudinal Braces on 84" Bottom Boats

  • 8 Corrugated Bottom Runners Running From Transom to Bow
  • 10 @ 1" x 2" Rectangular tubing braces running the hull length (placed between each crimp)
  • One 4" T-Bar @1/4" thick used for center keel from transom to start of rake.
  • One 4" T-Bar @1/4" thick sandwiched between two 6" pieces of flat-bar 1/4" thick from start of rake to tip of hull. This section of the rake takes the most beating from waves. It makes sense to us to beef it up here!

Transverse Braces on 84" Bottom Boats

  • 2" x 2" Square tubing placed on 12" centers coped over runners.
  • 3" x 3/16" T-Bar connects keel to sides and transverse tubing.
  • 1/4" Gusset plates ties tubing, T-Bar, and keel together on 12" centers.

If there is an accessory or feature you would like that is not listed here, let us know!



 



Solid Construction
As always, BFC Marine offers you the best of the best. All 3/16 aluminum with an exclusive bracing design makes this bay hull a lifetime boat!
 


High Performance Hulls
Our hulls are made of thick 3/16 aluminum for a MUCH tougher and LIGHTER hull than any fiberglass hull on the market.


22x72
Our standard Barracuda's come as you see here. Front and rear decks, console, jump seat, 7ft rod box, and driving seat. You may add to or take away from this design as you see fit.
 


22x72 w/ 225 Yamaha VMax
This hull is loaded with options! Base coat / Clear coat paint, hydroturf, 24v trolling motor, hydraulic steering, hydraulic jack plate, tandem axle aluminum trailer with brakes, on board battery charger, CD player, GPS, Sonar, swivel butt seats, live well, wash down pump station, and more!
 


22x72 w/ 150 Yamaha V-Max


Loaded
We can take your hull from a basic design all the way to a fully rigged out fishing package.


22x72 w/225 Yamaha
 


Finish Work
From Hydroturf mats, trolling motors, on board battery chargers, CD players, VHF radios, jack plates, outboard motors, ski racks, graphics, to whatever else you can add, we can do it!


Finish Work
From Hydroturf mats, trolling motors, on board battery chargers, CD players, VHF radios, jack-plates, outboard motors, ski racks, graphics, to whatever else you can add, we can do it!


Decked Out and Loaded!


Deep V Bottom
Our hulls are able to take on the rough water and still float high in the shallows! This 22x72 weighs 1500lbs and drafts less than 10" of water!
 


Gator Trax...Nothin' Like it!


20x72
You already know that Gator Trax is more than capable of building the finest, best performing, toughest duck boat on the market. Now you can complete your collection with the finest, best performing, toughest, aluminum bay boat ever built!
 


Yamaha or Mercury Engines Available
We can now outfit our bay boat hulls with your choice of Yamaha or Mercury engines.


Gator Trax Quality
Our reputation for quality will not be lost in this transition to the bay boat market. Rest assured you will receive the best hull money can buy from fit to finish.


20x72
This hull was designed to fish the Crappie Masters Professional Tournament Trail as well as to hunt ducks on the Mississippi River in Tennessee.
 


22 x 72


Performance
Our 20x72 made of thick 3/16 aluminum and heavy duty bracing still reaches speeds of over 50 mph with a 150hp


Precision Control
The Barracuda has amazing cornering ability! No skip, no slide, no dip! Never before have you had such accurate control of a high performance bay boat.
 


Smooth Ride
The Barracuda can be made with varying degree hull bottoms. We can build for guys that traverse a light chop to guys that stay in the open bays.
 


Layout and Design
There are several floor plans available and you are still allowed to put your personal touch on your new Barracuda.


20x72 w/ 115 Yamaha

 


20x72 Strike Series Bass Boat
 


Dream Boats
We've been building dream boats for duck hunter's for years. We just didn't want the fishermen to get jealous!


Fishing In Style
plenty of room for fishing and ample performance for tournament play.
 


20x72
This is a bay boat style hull with a bass boat style layout. Huge front deck, twin console, side console, rod locker, and live-well are a just a few features on this Barracuda.


Hydroturf on 22x72


20x72 Pro-Crappie Boat


Strike Series Bass Boat




CALL 225-294-9991 TO ORDER



© YourCompany.com 2013. All Rights Reserved. Powered by AspDotNetStorefront